Vicon ROUGHNECK V-CELL-HD-A, Быстрое руководство по установке

Страница: 11 / 16

V-CELL-HD-A Quick Installation Guide
11
3.2. Access from the Internet
Once connected, the network camera is accessible on your local network (LAN). To access the network camera
from the Internet you must configure your broadband router to allow incoming data traffic to the network
camera. To do this, enable the NAT-traversal feature, which will attempt to automatically configure the router
to allow access to the network camera. This is enabled from Setup > System > Network > NAT.
For more information, refer to section “3.5.6 System>Network>NAT” of User’s manual.
3.3 Setting the Admin Password Over a Secure Connection
To gain access to the camera, the password for
the default administrator user must be set. This is
done in the “Admin Password” dialog, which is
displayed when the network
camera
is accessed for
setup the first time. Enter your admin name and
password, set by the administrator.
Note: The default administrator username is
“ADMIN” and password is “1234”. If the password
is lost, the network camera must be reset to the
factory default settings. See section “3.6 Resetting
to the Factory Default Settings” for more details.
To prevent network eavesdropping when setting the admin password, it can be done via an encrypted HTTPS
connection, which requires an HTTPS certificate (see note below).
To set the password via a standard HTTP connection, enter it directly in the first dialog shown below. To set
the password via an encrypted HTTPS connection, see “3.5.6 System > Security > HTTPS”.
Note: HTTPS (Hypertext Transfer Protocol over SSL) is a protocol used to encrypt the traffic between web
browsers and servers. The HTTPS certificate controls the encrypted exchange of information.
3.4 Live View Page
The Live View page provides seven
screen modes: 1920x1080, 1280x1024,
1280x720, 704x480 (576), 640x480,
352x240 (288), and 320x240. Select the
most suitable mode in accordance with
your PC specifications and monitoring
purposes.