H.264 16-Channel Encoder Installation and Configuration Guide
|
29
Technical Information
Specifications
Input Voltage
24 VAC ±20%, 50/60 Hz nominal. Power over
Ethernet IEEE 802.3af or high power PoE.
NOTE:
Vicon requires the use of uninterruptible power
supply systems (UPS) to prevent voltage fluctuations
that can affect operation and cause damage to the
equipment. Failure to comply with this violates the unit
warranty.
Current
1.2 A max @ 24 VAC;
PoE: 0.39 A max @ 48 VDC. (Measured with 16
camera inputs, 1 control line and both USB ports
loaded with 500 mA each.)
Power
Consumption
18.7 W
Heat
Equivalent
66 btu/hr
Certifications
CE; FCC Class A; UL
Video Specifications
Video
Channels
16
Video Formats
Supported
NTSC/EIA and PAL/CCIR
Video
Compression
H.264
Video
Streaming
TCP, UDP, unicast and multicast. Refer to Video
Streaming Ports table on page 26.
Resolutions
NTSC: HCIF, CIF, 2 CIF, 4 CIF (352x120 - 720x480);
PAL: HCIF, CIF, 2 CIF, 4 CIF (352x144 - 720x576).
Frame Rate
30/25 fps (NTSC/PAL) per camera at full resolution*
