Safety Information
This product is designed and tested in accordance with EN 61010-1 (2001) standards. The following manual
contains information and warnings. They must be followed in order to keep the instrument in a working
condition and ensure safe operation
Safety and Electrical Symbols
Warning - Danger -
Identifies conditions or practices that could cause physical harm.
Caution
- Identifies conditions or practices that could result in permanent loss of data or
damage the equipment.
Important Information
- Must be read and followed.
Alternating current
GND or earth ground
Protective conductor terminal
Electronics common - not linked to earth ground
Isolated common - not linked to earth ground, nor electronics common
Shield connection location
CAT I
Overvoltage (installation or measurement) Category 1
NOTICE: Trademarks referenced herein are trademarks and registered trademarks of VibroSystM Inc. or third parties, and are the property of their respective
owners. Third party trademarks are used for identification purposes only and shall not be construed as indicative of any relationship or endorsement between
VibroSystM Inc. and the third parties.
This manual is provided solely for guidance. VibrosystM Inc. takes no responsibility or liability for any damage caused by accidents, improper installation or
misuse. Liability is limited to the repair and/or replacement of defective products.
VibroSystM Inc. 2727 Jacques-Cartier E. Blvd, Longueuil, QC, Canada J4N 1L7 | Phone: 450 646-2157 | U.S. Toll-free Line: 800 663-8379
email: [email protected] |
2
ZPU-5000 Acquisition and Processing Unit with ZOOM Version 7.4 - User’s Manual
Содержание ZPU-5000
Страница 1: ...ZPU 5000 Acquisition and Processing Unit with ZOOM Version 7 4 User s Manual P N 9483 06M1A 240...
Страница 6: ...6 ZPU 5000 Acquisition and Processing Unit with ZOOM Version 7 4 User s Manual...
Страница 46: ...46 ZPU 5000 Acquisition and Processing Unit with ZOOM Version 7 4 User s Manual...
