VibroSystM ZPU-5000, Руководство пользователя

Страница: 3 / 46

Safety Precautions
Warning - Danger Caution
•
Although most instruments and accessories are normally used at
non-hazardous voltage levels, hazardous conditions may still be present in some situations.
•
This product is intended to be used by qualified operators and maintenance personnel who
recognize shock hazards and are familiar with the safety precautions required to avoid
possible
injury. Carefully read and follow all installation, operation, and maintenance
information before using this product.
•
Install and use this product only as specified in this manual or the protection provided by this
instrument might be impaired.
•
Do not use this product in wet environments.
•
When in doubt that safety protection has been impaired, make this instrument inoperative
and secure it against any unintended operation.
•
Have this instrument serviced by qualified service personnel only.
•
To avoid shock hazards, connect the power supply to a properly grounded power source. If a
two-conductor power cord is used, a protective grounding wire must be connected between
the ground terminal and earth ground before connecting the power cord or operating the
instrument.
•
Never remove the cover or open the case without first turning off the main power source.
•
Never operate this instrument with the cover removed or the case open.
•
Use caution when working with voltages above 30 VAC RMS or 42 VDC. These voltages can
cause shock hazards.
•
Only use the replacement fuse(s) specified in this manual.
•
Do not operate this instrument around explosive gas, vapor, or dust.
ZPU-5000 Acquisition and Processing Unit with ZOOM Version 7.4 - User’s Manual 3