14
☆
3
[Pcs]
☆
4
[%]
Setup of units of
measurement to
be displayed
※
1
☆
5
Unit not set
Disable
Display of the
auxiliary scale
interval
☆
Enable (
is the auxiliary scale interval.)
Note: The auxiliary-scale-interval place does not
represent a verification scale interval. Use it
only as a reference value.
☆
Disable
GLP-compliant
print
※
2
Enable
Prints a GLP-compliant format at calibration.
(Refer to “9.3 GLP-compliant print” (Page 31).)
No output is made while the auxiliary scale interval is
displayed.
Output is made even while the auxiliary scale interval is
displayed.
Output format
while the auxiliary
scale interval is
displayed
☆
Output is made with “/” added to the left of the
auxiliary-scale-interval place.
☆
1
〜☆
5: default factory settings [
]
〜
[
]
※
1
Can be set only for a model on which the lock switch is off.
For a model on which the lock switch is on, only the units set when the switch was off are
effective.
※
2
This setting is only available with the AJH-CE Series.
4.3 Interface Section
Displayed when [
] is set to [
] or [
]
Item Set
Value
Description
Stop output
Output continuous at all times
Output continuous if stable (stop output if unstable)
Outputs once by pressing Memory key (irrespective
of whether stable).
Outputs once if stable. Outputs if the balance is stable
when a sample is loaded after the preceding sample
has been removed and the balance indicated zero, or
less.
Outputs once if stable, and stops output when unstable.
Even if the sample is not replaced, the balance is output
once when it stabilizes next time (including the zero
indication).
Outputs once if stable, and outputs continuously when
unstable. Even if the sample is not replaced, output of
the balance stops when it stabilizes after being output
once.
Output Control
☆
Pressing Memory key causes the balance to output
once when stable.
☆
1200 bps
2400 bps
4800 bps
Baud Rate
9600 bps
☆
None
Odd
Parity
Even
Displayed only when [
(7-digit numeric format)] is specified.
☆
denotes a factory-setting
※
The data interval in continuous output mode is 0.1 to 1 second. (The interval varies depending
on weighting conditions and other factors.)
Содержание AJ-CESeries
Страница 2: ......
