13
4.2 Description of Functions
Item Set
Value
Description
Disable
Bar graph display
☆
Enable
☆
Disable
Limit function
Enable
☆
Always judge (judges even when the balance is
unstable)
Judgement
condition
Judge only when the balance is stable (does not judge
if the balance is unstable)
Ranges 5 graduation is judged (5
graduation or below, including negative ranges, are
not judged.)
Judgement
range
☆
The entire range is judged (the entire range, including
the negative, is judged).
One-point setup (judges between OK and LO)
Displayed only when limit
function is activated
Number of
points for
judgement
☆
Upper-limit and lower-limit values are set up (judges
among HI, OK and LO).
Disable
Auto-zero
(zero-tracking)
☆
Enable
This function automatically sets the zero point
exactly to zero to prevent slight deviations.
Disable (balance operates
continuously)
Auto power-off
☆
Enable (balance powers off in
approximately three minutes)
This function is
available only when
the balance is
battery-operated.
Measurement by consecutive weighings.
☆
Response speed
Fast
↓
Slow
☆
Stability parameters
Wide (mild)
↓
Narrow (strict)
Disable input/output
☆
Six-digit numeric format
Interface
Seven-digit numeric format
☆
1
[
g
]
☆
2
[ ] (ct)
[ ] (oz)
[ ] (lb)
[ ] (ozt)
[ ] (dwt)
[ ] (tl_Hong Kong)
[
Upper right] (tl_Singapore,Malaysia)
[
Lower right] (tl_Taiwan)
[mom]
Setup of units of
measurement to be
displayed
※
1
Register selected
measuring units with
Function key.
[ ] (to)
Items marked
☆
are the default factory settings.
☆
1
〜
☆
5: default settings [
]
〜
[
]
Содержание AJ-CESeries
Страница 2: ......
