Viavi T-BERD 6000A V2, Руководство пользователя

Страница: 88 / 188

Chapter 9 Transferring the 6000A V2 Platform Interface
Virtual control buttons bar
68 User Manual 76100000200 Rev. 001
You can use keyboard mouse of the PC to control the 6000A V2 Platform
(see
“Equivalence between the keyboard and 6000A V2 Platform” on
page 68 ).
Virtual control buttons bar
It is possible to emulate hard keys with Virtual Control buttons. This
virtual control buttons bar is especially useful when the 6000A V2 Plat-
form screen is exported on a remote PC.
To display those buttons, click once on the top of the screen in the status
bar, at the same height than the date and time.
The virtual control buttons bar is displayed during a few seconds. You
may click on any of these buttons to obtain exactly the same results than
using the hard keys on the front panel of the 6000A V2 Platform.
Equivalence between the keyboard and 6000A V2 Platform
The PC keyboard can replaced all the buttons and keys of the 6000A V2
Platform except the
O
N
/O
FF
button
:
– The menu keys to the right of the screen are replaced by the func-
tion keys
F1
to
F7
.
– The buttons below the screen are equivalent to Ctrl + a letter (see
table below).
– The direction keys have the same function on the external keyboard
and on the 6000A V2 Platform.
NOTE
Once Remote screen is accessbile via VNC, the icon displays on
the upper banner of the screen until the connection is cut or the
6000A V2 Platform is switched off.
When two or more users are using remote screen function onto the
same Platform, the icon is
.
Fig. 38 Virtual control buttons bar