Viavi T-BERD 6000A V2, Руководство пользователя

Страница: 132 / 188

Chapter 12 WIFI Option
Configuring the WIFI mode to which the Platform is connected
112 User Manual 76100000200 Rev. 001
Once association of Platform with SSID is established, the icon
becomes to indicate the connection is active.
Configuring the WIFI mode to which the Platform is connected
To work on WIFI with the Platform, configure the 802.11 or 802.11 IPV6
parameters on the Setup screen.
1 If 802.11 box is chosen, select the mode of connection:
Config 1 to 4 static mode enabling input of the configuration of
4 sites. If this parameter is selected, the following
parameters must be entered:
– Site Name the user can enter the name of the site in the Edit
menu.
– IP Address IP address of the 6000A V2 Platform
– IP Mask address of the mask of the sub-network
– IP Gateway IP address of the machine enabling access
outside the sub-network.
– DNS (Domain Name Server) IP address of the
machine providing the IP address on the basis of
the name
– Domain name name of the local network to which the 6000A V2
Platform is connected.
Dynamic in this mode, which requires a DHCP server, the
6000A V2 Platform requests an IP address from
this server which will be allocated dynamically if
dynamic host configuration is activated on the
local network.
After selecting this mode or after power-on, the
6000A V2 Platform tries to establish a connection
to obtain an address from a DHCP server. If for
any reason, this process fails, the 6000A V2
Platform reverses to static IP address mode with
User1 IP address.
Note the IP address of the Platform, to be able to remote screen on PC
or to transfer files.
Fig. 74 WIFI connection in Dynamic mode
Note IP
Address