Viavi T-BERD 6000A V2, Руководство пользователя

Страница: 133 / 188

Chapter 12 WIFI Option
Configuring the WIFI mode to which the Platform is connected
User Manual 76100000200 Rev. 001 113
In 802.11 IPv6 mode, the following parameters ( Link , IP , GW and DNS )
are automatically defined and cannot be modified
1 The 802.11 IPv6 box is to be used if connection must be in confor-
mance with the IPV6 standards. Select the mode of connection:
Config 1 to 4 static mode enabling input of the configuration of
4 sites. If this parameter is selected, the following
parameters are available:
– Site Name the user can enter the name of the site in the Edit
menu.
– Link automatically displays the link name (cannot be
modified)
– IP IP address of the Platform
– GW IP address of the machine enabling access
outside the sub-network.
– DNS IP address of the machine providing the IP
address on the basis of the name
Dynamic in this mode, which requires a DHCP server, the
6000A V2 Platform requests an IP address from
this server which will be allocated dynamically if
dynamic host configuration is activated on the
local network.
After selecting this mode or after power-on, the
tries to establish a connection to obtain an
address from a DHCP server. If for any reason,
this process fails, the 6000A V2 Platform
reverses to static IP address mode with User1 IP
address.
If Dynamic mode is selected, then the following parameters ( Link / IP /
GW / DNS ) are automatically configured and cannot be modified
(greyed).
Fig. 75 WIFI connection in Dynamic mode with IPV6