Viavi SmartClass ORL-85 Скачать руководство пользователя страница 41

Страница: 41 / 95

ORL-85/ORL-85P

6 R

ETURN

OSS

PERATION

AVING

ETURN

OSS

TEST

RESULTS

The instrument is calibrated manually.

To return to the factory calibration mode, tap the

[

Use Factory

Calibration

]

button in the User Calibration menu.

Saving Return Loss test results

Before starting a measurement a project must be selected and

set to active. Thus, all results are assigned to that project when

saved. If no project was defined by the user, the instrument will

use the Test-Tool project “default”, which is always present (see

“Managing projects” on page 35).
Results are stored simply by pressing the

[

]

key. Each time the

key is pressed, the result just displayed will be saved.

To save current results:

The instrument is in application mode and displays the test

results (overview or details) to be stored.

Press the

[

]

key.

The Save dialog is displayed.

As file name the label prefix defined in the project settings is

showed on top of the display.

Defined label name.

Tap field to edit label name.

• Return Loss: Number of already saved return loss results.

• Powermeter: Number of already saved powermeter results.

• Probe: Number of already saved probe results.

• PCM: Number of already saved PCM results.

Decrease / increase label ID

Save results

Содержание SmartClass ORL-85
































































































Результаты поиска

Содержание SmartClass ORL-85

Отзывы:

Похожие инструкции для SmartClass ORL-85

Бренды по названию

Популярные бренды

Viavi SmartClass ORL-85, Руководство по эксплуатации

Результаты поиска

Содержание SmartClass ORL-85

Отзывы:

Похожие инструкции для SmartClass ORL-85

Бренды по названию

Популярные бренды