MCA III User’s Guide
22137817, Rev. 000
Feb 2020
29
Chapter
1 Quick Tour
Activity and error screens
If a new activity and/or error occurs within the device, the system displays a popup
message to indicate the type of activity and then returns to the previous screen after 10
seconds.
If a new activity or error occurs prior to expiration of the 10 seconds, then the new message
will be displayed and the 10 seconds will start again. The only exceptions to this rule are
the Wi-Fi and Ethernet Upload In Progress screens which will remain on the screen until the
upload is complete, an error occurs, or the
Select
button is single clicked.
Activity screen
Description
The MCA III successfully completed not only an
exchange of data with LAW, but also removed that data
from its own memory as well.
The MCA III is attempting to send the LAW server EDN
leak information.
The MCA III could not connect to the specified endpoint
server socket via Ethernet. Verify that the endpoint
server is running and that the network socket is not
blocked by any firewall.
The Ethernet connection has either been newly
connected or disconnected.
The MCA III is attempting to upload logged data to the
LAW server via the Ethernet connection.
An error occured when attempting to contact the Fleet
Dispatch Server. This can occur in an area that has
weak or no signal available at the time of upload or
the connectivity information (IP/DNS and/or port) is
incorrect. Move to a location that has a signal or use the
Seeker Setup software to correct this error.
