MCA III User’s Guide
22137817, Rev. 000
Feb 2020
35
Chapter
2 Using Your Seeker MCA III
NOTE:
When the GPS receiver has been off or has not been able
to receive a satellite signal, for more than five minutes,
the device will beep twice every few seconds until the
condition is corrected.
NOTE:
When the GPS receiver IS NOT receiving a satellite signal,
the MCA III will not record leakage data from the Seeker.
NOTE:
Data synchronization will only work when the Seeker or
Seeker X is in the Mobile Mount. The SNAPSHOT button is
used to record leakage information recorded by the Seeker
or Seeker X when it is not in the Mobile Mount.
GPS Signal status
When the Seeker or Seeker X is placed in the Mobile Mount after the communications have
been established and “CAO” is displayed, the GPS icon is used to display the status of the
GPS Signal as follows:
y
When the GPS receiver is receiving a satellite signal, the GPS icon will be displayed
constantly.
y
When the GPS receiver is not receiving a satellite signal, the GPS icon will flash.
Data synchronization
If you do not have a network connection for LAW uploads when using the Seeker or Seeker
X with the Seeker MCA III, the data recorded in the Seeker MCA III can be synchronized with
the internal memory of the Seeker or Seeker X for later upload through a PC.
Seeker GPS signal
Seeker X GPS signal
SEEKER X
μV
m
dB
NOISE
FREQ
PK
DIST
GPS
