MCA III User’s Guide
22137817, Rev. 000
Feb 2020
31
Chapter
1 Quick Tour
Activity screen
Description
You have successfully issued a “double-click” to confirm
your request of an operation to be performed.
The MCA III was not able to establish an association
connection with a wireless access point. Verify that the
security settings match on both the Access Point and
the MCA III and that the AP is in range.
The endpoint server DNS name could not be resolved
over the WiFi connection. Verify that the device can
reach the specified DNS server and that the DNS server
can resolve the name specified to the MCA III using
Seeker Setup. You may need the assistance of IT staff
to correct this problem, or switch to using a static IP.
This can be the result of a poor or weak cell signal if
connecting to a vehicle hotspot.
The internal self test of the WiFi module failed. If the
error persists, return the device to the factory for repair.
The MCA III could not obtain an IP address from the
wireless access point. If the MCA is set to DHCP, verify
the access point provides a DHCP server or a route to a
network DHCP server. This can be the result of a poor or
weak cell signal if connecting to a vehicle hotspot.
There is a problem reading the WiFi signal levels. This
error is not critical, but may indicate a problem with the
device if it persists.
The MCA III could not connect to the specified endpoint
server socket via WiFi. Verify that the endpoint server
is running and that the network socket is not blocked
by any firewall. This can be the result of a poor or weak
cell signal if connecting to a vehicle hots
The MCA III is attempting to upload logged data to the
LAW server via the Wi-Fi connection.
