Viavi Seeker D Lite, Руководство пользователя

Страница: 18 / 42

Seeker D Lite User's Guide
Document Num., Rev. 4 May 2018 Page 18
Display Screen
1. GPS – Not used on this meter.
2. DIST – Not used on this meter.
3. PK – Shown when the Peak Hold feature is active. When the icon is not shown, the
Peak Hold feature is turned off.
4. FREQ – Indicates the number of the currently selected frequency preset.
5. Tag
– Shown when tagged signal leakage is detected.
6. NOISE – Indicates the meter is in Noise mode, showing ambient noise levels.
7. Measurement units – Indicates leakage measurement units as selected in Seeker
Setup.
8. Main display – Shows various parameters, and its function depends on the current
display mode selection.
9. Antenna – Flashes when the signal mode is selected. This is the normal mode for
leakage detection.
1 2 3 4 5
7
6
8
9
10
11 12 13