Viavi Seeker D Lite, Руководство пользователя

Страница: 21 / 42

Seeker D Lite User’s Guide
Document Num., Rev. 4 May 2018 Page 21
Seeker D Lite Operation
Chapter 4
Available Configuration Settings
You must configure the settings of the Seeker D Lite using the Seeker Setup software. The
Seeker D Lite comes from the factory with default settings, but it is likely they will need to
be customized. Detailed instructions can be found in the Seeker Setup Software Operation
Manual.
Feature Available Values Default Value Device Software
Display & Notification Settings
Toggle Speaker Volume Low to High High YES NO
Toggle Ambient Noise Measurement On, Off (momentarily) Off YES NO
Set Display Units uV/m, dBuV, dBuV/m uV/m NO YES
Home Cert (HC) Squelch 0.1 to 20 uV/m 0.1 uV/m NO YES
Squelch 20 to 2000 uV/m 20 uV/m NO YES
Frequency Settings
Enable Presets
Enable, Disable
(min of 1, max of 10)
2 Enabled NO YES
Toggle Between Presets 0 to 9 (only when enabled) 1 to 2 YES NO
Set Frequency Values
135 to 139 & 610.5 to 615 MHz
See the Selecting a
Preset Frequency
section later in this
Chapter
NO YES
Set Primary Frequency Preset 0 to 9 (select only one)
Set Secondary Frequency Preset 0 to 9
(one for each primary)
Set Tag Spacing 1 or 2
Peak Hold Settings
Enable Peak Hold Function Enable, Disable Disabled YES YES
Toggle Peak Hold Function On, Off (only when enabled) Off YES NO
Device Management
Technician ID Custom Alphanumeric trilithi NO YES
Update Firmware N/A N/A NO YES