Seeker D Lite User's Guide
Document Num., Rev. 4
May 2018
Page 34
Speaker Volume Level
While testing for leaks, you may need to adjust the volume of the leakage tone.
To check the volume level, turn your Seeker D Lite on and press the
SELECT
button twice.
• When the Speaker Volume Level display is selected, the Speaker icon is continuously
displayed as indicated by the red circle in the following image.
• When this display is selected, the following will occur:
1. The bar graph will indicate the speaker volume.
2. The numerical display will continue to display the RF
signal level.
• Press the
CHANGE
button repeatedly to increase the speaker
volume of the leakage tone. Brief presses increase the volume
to maximum and then it rolls over to the minimum volume.
After a few seconds in the Speaker Volume Level display
without any action by the user, the display will revert to the
Signal Level display.
The speaker volume does not change during adjustment, but
is instead indicated by the bar graph. When leaks are found,
you will hear the volume change in the leakage tone.
Speaker Volume
1
2
Содержание Seeker D Lite
Страница 1: ...Seeker D Lite In Home Leakage Detector User s Guide ...
Страница 8: ...Seeker D Lite User s Guide Document Num Rev 4 May 2018 Page 8 ...
Страница 12: ...Seeker D Lite User s Guide Document Num Rev 4 May 2018 Page 12 ...
Страница 41: ...Seeker D Lite User s Guide Document Num Rev 4 May 2018 Page 41 ...
