Seeker D Lite User's Guide
Document Num., Rev. 4
May 2018
Page 26
• Use the
SELECT
button to toggle through
its display modes. As you toggle, the display
modes will appear in the same order in which
they are discussed in this section.
• Use the
CHANGE
button to adjust the
settings of some display modes.
Device Information & Settings
While testing for leaks, you will need to view the information shown by the Seeker’s display
modes.
Viewing the Battery Charge Level
To check the battery level, turn your Seeker D Lite on and press the
SELECT
button once.
• When the Battery Charge Level display is selected, the Battery icon flashes as
indicated by the red circle in the following image.
• When this display is selected, the following will occur:
1. The bar graph will indicate the amount of battery
charge available. As long as there are at least a few
bars left, your Seeker D Lite has enough charge to
operate. If the battery meter shows less than 50%,
the Seeker D Lite should be charged.
2. The numerical display will continue to display the RF
signal level.
Battery Charge Level
1
2
The display will revert to the Signal Level display after a few
seconds in the Battery Charge Level display (without any
action by the user).
Содержание Seeker D Lite
Страница 1: ...Seeker D Lite In Home Leakage Detector User s Guide ...
Страница 8: ...Seeker D Lite User s Guide Document Num Rev 4 May 2018 Page 8 ...
Страница 12: ...Seeker D Lite User s Guide Document Num Rev 4 May 2018 Page 12 ...
Страница 41: ...Seeker D Lite User s Guide Document Num Rev 4 May 2018 Page 41 ...
