Viavi Seeker D Lite, Руководство пользователя

Страница: 30 / 42

Seeker D Lite User's Guide
Document Num., Rev. 4 May 2018 Page 30
Selecting a Preset Frequency
The Preset Frequencies display is used to select the RF signal level measurement
frequency presets used by the Seeker D Lite. The preset frequencies are numbered from 0
to 9 and can be configured using the Seeker Setup software.
The Seeker D Lite is programmed at the factory with the following preset frequencies:
FREQ # Default Enabled Primary Frequency Secondary Frequency Tag
1 YES YES 612.0000 138.0000 1
2 NO YES 138.0000 612.0000 1
To select a preset frequency, turn your Seeker D Lite on and press the SELECT button
repeatedly until the FREQ icon flashes at the top of the display, as indicated in the below
images.
• When the Preset Frequency display is selected, the FREQ icon at the top of the
display will flash as indicated by the red circle in the following images.
• When the Preset Frequencies display is selected, pressing the
CHANGE
button will
step through the enabled presets in numerical order starting at 1 and ending at 0.
Preset #1 Preset #2
For detailed instructions on how to set the primary and
secondary frequency presets and their associated tag
settings, see the Seeker Setup Software Operation Manual.
Preset Frequency Toggle
To quickly toggle between preset frequencies:
1. Press the
CHANGE button to show the current preset setting.
2. Press the CHANGE button repeatedly to quickly toggle through the presets.