Viavi ALT-8000 Скачать руководство пользователя страница 36

Страница: 36 / 39

ALT-8000 Getting Started Manual

10.1

AC Power

The AC Adapter, supplied with the ALT-8000, operates over

a voltage range of 100 to 250 VAC at 47 to 63 Hz. The

battery charger operates whenever DC power (11 to 32 Vdc)

is applied to the Test Set with the supplied AC Adapter or a

suitable DC power source.

If the supply voltage is <11 V, the unit switches to internal

battery. If the voltage is >32 V, a 7 Amp resettable fuse on

the DC input port opens, protecting the test set. Reset fuse

by disconnecting and reconnecting the power cord to the

unit.
When charging, the battery reaches an 100% charge in

approximately four hours. The Battery Charging temperature

range is 0° to 45° C, controlled by an internal battery

charger.

10.2

BATTERY RECHARGING USING EXTERNAL

POWER SUPPLY

Perform the following steps to recharge the battery using

and external power supply:

STEP

PROCEDURE

1. Connect AC Line Cable to AC PWR Connector on the AC

Adapter and an appropriate AC power source.

2. Connect the AC Adapter DC output to the DC POWER

Connector on the ALT-8000.

3. Verify the BATTERY indicator displays blinking green.
4. Allow four hours for battery charge or until the BATTERY

Indicator displays a steady green.

BATTERY LED INDICATORS

Battery Voltage Low

(red)

The unit will turn off within one minute w/o charger.

Battery Pre-Charging

(flashing yellow)

Trickle charge during extremely low voltage on the

battery.

Battery Charging

(flashing green)

Charge in progress.

All manuals and user guides at all-guides.com

Содержание ALT-8000








































Результаты поиска

Содержание ALT-8000

Отзывы:

Похожие инструкции для ALT-8000

Бренды по названию

Популярные бренды

Viavi ALT-8000, Руководство по началу работы

Результаты поиска

Содержание ALT-8000

Отзывы:

Похожие инструкции для ALT-8000

Бренды по названию

Популярные бренды