Viavi ALT-8000, Руководство по началу работы

Страница: 6 / 39

ALT-8000 Getting Started Manual
4
Precautions
SAFETY FIRST - TO ALL OPERATIONS PERSONNEL
General Conditions of Use
This product is designed and tested to comply with the
requirements of IEC/EN61010-1 ‘Safety requirements for
electrical equipment for measurement, control and
laboratory use’ for Class I portable equipment and is for use
in a pollution degree 2 environment. The equipment is
designed to operate from installation supply Category II.
Equipment should be protected from liquids such as spills,
leaks, etc. and precipitation such as rain, snow, etc. When
moving the equipment from a cold to hot environment, allow
the temperature of the equipment to stabilize before the
equipment is connected to the supply to avoid condensation
forming. The equipment must only be operated within the
environmental conditions specified in the performance data.
This product is not approved for use in hazardous
atmospheres or medical applications. If the equipment is to
be used in a safety-related application, such as avionics or
military applications, the suitability of the product must be
assessed and approved for use by a competent person.
Refer all servicing of unit to Qualified Technical Personnel.
This unit contains no operator serviceable parts.
Case, Cover or Panel Removal
Opening the Case Assembly exposes the operator to
electrical hazards that may result in electrical shock or
equipment damage. Do not operate this Test Set with the
Case Assembly open.
Safety Identification in Technical Manual
This manual uses the following terms to draw attention to
possible safety hazards that may exist when operating or
servicing this equipment:
IDENTIFIES CONDITIONS OR ACTIVITIES
THAT, IF IGNORED, CAN RESULT IN
EQUIPMENT OR PROPERTY DAMAGE,
E.G. FIRE.
IDENTIFIES CONDITIONS OR ACTIVITIES
THAT, IF IGNORED, CAN RESULT IN
PERSONAL INJURY OR DEATH.
C A U T I O N
W A R N I N G
All manuals and user guides at all-guides.com