37
AA-800 / AA-800T rev.03
DELAY FOR PAGER
(0 .. 59 SEC): _ _
9. Enter the total delay (Message Delay) used to wait for the end of the pager mes-
sage and press
Enter
. The system prompts for another phone number. If you are
finished, press
Cancel
.
ENTER CODE TO
PAGE (0 .. 99): _ _
6. To configure a phone number as a pager number, use the arrow keys to scroll to
the Pager item in the menu:
7. Press
Enter
to select this option.
8. Enter the two digit code used to identify the site and press
Enter
.
Figure 1: Calling a Pager Number
Figure 1 below shows the sequence of events. The Agri-Alert first dials the number
of the pager device. When the pager system responds, the Agri-Alert waits for the
voice message from the pager system to finish. In the diagram, this is called the
message delay. The diagram shows an additional delay used to ensure that the pager
system is ready to receive the code number from the Agri-Alert system. This is up to
the system (usually 3 seconds). Following this, the Agri-Alert dials the seven digit
code number or numbers to be displayed on the pager device. When configuring a
number as a pager number, the user enters the value:
Message Delay
when the
system prompts for the Delay for Pager.
PHONE NUMBER OF
PAGER?
ADDITIONAL
DELAY
DIALING
PAGER
NUMBER
DIALING
CODE
NUMBER
MESSAGE
DELAY
Time
PAGER SYSTEM ANSWERS AGRI-ALERT TRANSMITS
AGRI-ALERT DIALS
