18
AA-800 / AA-800T rev.03
2.3 USER ID MESSAGE
Definition:
When giving status reports and alarm messages, the system identifies
itself with a voice recording provided by the user.
Setting:
1. Press the
ID message
key
DEF
ID message
. The current ID message is played over the
speaker on the front panel. If no ID message has yet been recorded, the system
displays
NONE
.
2. To modify the current message, press
Enter
. Otherwise, press
Cancel
.
To Modify ID Message:
3. Type
2
to record a new ID message.
4. Press the ID message key
DEF
ID message
and hold while you speak the message into the
microphone on the front panel.
5. The screen will count down from a maximum of 7 seconds until the ID message
key is released.
ID MESSAGE
PLAY
FOR RECORDING
PRESS 3 AND HOLD
RECORDING
07 SEC REMAINING
STATUS . . . . . . . (1)
MESSAGE . . . . . . (2)
TO MODIFY. . . . . (
↵
↵↵
↵↵
)
TO QUIT. . . . . . . (X)
