Viadrus HERCULES ECO, Руководство по эксплуатации и установке

Страница: 15 / 40

15
Boilers positioning with regard to the necessary handling space:
•
Basic setting AA5 / AB5 according Č SN 33 2000-1 ed. 2
•
Minimum 2100 mm boiler room height (when the fuel reservoir cover is fully open)
Fig.no. 7 Positioning of boiler in boiler room
(dimension behind the slash applies to VIADRUS HERCULES ECO 10)
Boilers positioning with regard to the electricity network:
•
Boiler must be installed in a way making sure that the plug in the socket (230 V/50 Hz) is always
accessible.
•
Boiler is connected to the el. network through a wired in and movable cord terminated by a standardized
plug.
•
Protection against electric shock must be provided according to valid EN (see chap.5.1.)
Fuel positioning:
•
for a correct fuel combustion in boiler there must be used dry fuel (up to 12% moisture). We
recommend to store the pellets in their original package from manufacturer (PET bags) on a dry place.
•
it is out of question to store the fuel behind the boiler or to store it next to boilers in a distance less than
400 mm
•
the manufacturer recommends to keep min. 1 000 mm distance between boiler and fuel or to store fuel
in a room different from that where boiler is installed.
The room where boiler is installed must be provided with permanent air supply for combustion and
possibly with ventilation (the air consumption at VIADRUS HERCULES ECO 5 boilers is approx.
80 m
3
. h
-1
, (the air consumption at VIADRUS HERCULES ECO 10 boilers is approx. 160 m
3
. h
-1
).
The heating system piping connection must be done by a person authorized according to
regulations.
WARNING: At a boiler connected to the heating system there must be installed a discharge cock
at the lowest point and as close as possible to boiler.