Viadrus G 700, Руководство пользователя

Страница: 19 / 23

17
All skilled interventions can only be done by a professional contractual service organization trained by
the manufacturer.
Before the cleaning works you must disconnected the boiler from el. network and the burner from fuel
supply, open the closing plate with burner, which makes the combustion chamber and convection parts
chambers accessible for cleaning. By using the brush remove the impurities from heat transfer surfaces. For a
proper cleaning of vertical draughts between the rear and central sections you must dismount 4 small covers for
the purpose of cleaning. This you can do after you have removed the upper and lower part of the rear shell. The
remains after cleaning must be removed from combustion chamber space, from exhaust neck and flue gases
collector- this after you have dismounted the holder with explosive flap (you must not handle the explosive flap
and springs).
After cleaning you must close all small covers, closing plate, burner plate with burner, mount the
holder with explosive flap and check them for tightness.
9.
Instructions for product disposal after its service life
Because the product is made of common metal materials its individual components are recommended to be
disposed of as follows:
- the exchanger (grey cast-iron) through a firm dealing with waste collection and disposal
- piping, shell
through a firm dealing with waste collection and disposal
- other metal parts through a firm dealing with waste collection and disposal
- ROTAFLEX insulation material - into the common waste
The boiler package should be disposed of in following way:
-
plastic foil, cardboard package and wooden pallet into the common waste
- metal strap (for strapping) - through a firm dealing with waste collection and disposal
In case that the product has lost its serviceability you can advantage of product “take back service” ( if
this is established); in case that the originator has declared that it is a scrap it must be handled
according to the valid legislation of relevant country.
10.
Guarantee and liability for defects