Vestil SWA Series, Инструкция по эксплуатации

Страница: 19 / 88

F:\Manual\SM-1517R-110V-100514 14.05.2010. - 16 -
5-2 Wrapping Function Control
『
Turntable Start
』
:
Starts the turntable rotation, m otor w ill stop autom atically when wrapping is
completed.
『
Film-Seat Pause Button
』
:
When wrapping a particular section of the package that needs extra overlapping
of film to give strength, press and hold th is button f or the f ilm-seat to pause at
the desired section of overlapping. W hen the operator is satisfied with the
amount of overlapping, release this button and the film -seat will continue its
ascending/descending.
『
Turntable and Film-seat Zero-return Button
』
:
This button has two functions:
1:
It can be used to determine the height of package in case of m alfunctioning
of the electronic eye. W hen electronic eye malfunctions, the film -seat can not
sense the height of the package and w ill continue to ascend, in which case by
pressing this button the film-seat will cease ascending and start counting number
of upper layer wrapping cycles. Also press this button if the film
wrapping
reaches a particular height of the pack age and further m ore wrapping above is
not desired.
2:
If the emergency button is activated during wrapping, the turntable and the
film-seat will not be stopped at the star ting position. Therefore in order for both
the turntable and the film -seat to retu rn to their starting position, press this
button once f or turntable to return to starting position and press again for
film-seat to return to starting position.
『
Standard Wrapping
』
:
Film starts wrapping from the bottom of the package to the top, and once from
top back to bottom
。
『
Single Layer Wrapping
』
:
Film wraps once from bottom to top and stops when turntable com es to a halt.
Film set then automatically descends down to starting point.
『
Water Proof Wrapping
』
:
Film wraps from bottom to top and then comes to a halt at
approximately 10cm~15cm below the top of the package, then a sheet of water
proofing film or plastic should be m anually placed on top of the package. Press
the Turntable Start button once m ore to restart the wrapping process, at which
the film will start wrapping from top back to bottom.