Table of Contents
12/2/20
FM MANUAL.DOCX
Table of Contents
Copyright 2020, Vestil Manufacturing Corp.
Page 10 of 20
STEP 11. Weld the mounting plate to the dock edge. Have a qualified welder apply a continuous weld over the
top edge of the mounting plate, and down both sides of the mounting plate to the bottom of the steel edge.
STEP 12. Install four ¾”×5” anchors into the dock through the holes in the mounting plate into the dock.
STEP 13. Weld the bumper boxes to the dock edge. For each box, apply a continuous weld across the top,
and down both sides to the bottom of the steel dock edge.
STEP 14. Install a single ¾”×5” anchor into the dock through the flange of each bumper box.
Proceed to Step 27
to complete the installation.
