EN-24
EN
If your fridge freezer is not working properly, it may be a minor problem, therefore check the
following, before calling an electrician to save time and money.
What to do if your appliance does not operate;
Check that;
• There is no power,
• The general switch in your home is disconnected ,
•
The socket is not sufficient. To check this, plug in another appliance that you know which
is working into the same socket.
ERROR
TYPE
MEANING
WHY
WHAT TO DO
E10
"Refrigerator
comp. Not Cold
enough"
Ideal temperature
for Ref.
Compartment is
+4
o
C. If you see
this warning your
foods have risk of
spoiling.
This warning
becomes visible if
electricity is off for
a long time (most
probably) or the
refrigerator is
activated for the
first time or hot
food is loaded to
the appliance.
1. Set the refrigerator temperature to
colder values or set the super cooling
mode until the compartment gets to normal
temperature.
2. Do not open the door much until this
failure is off.
3. Please empty the location at the front
area of air duct channel holes.
4. Please be careful while loading the
appliance in order not to avoid the
ventilation at the areas which are very
close to the sensor.
5. Please don’t open the refrigerator doors
frequently until the warning disappears.
6. If the warning continues, please contact
with authorized technical service.
E11
Refrigerator
comp. too Cold
The foods starts
to freeze because
of the too much
cold temperature.
This warning
means that the
temperature
of the fridge
compartment
is very low.
Therefore, this
ambient condition
may lead to
the freezing
of foods in the
compartment.
1. Check if the “Super cooling mode” is on.
2. Decrease the refrigerator temperature
values.
3. If the warning continues, please contact
with authorized technical service.
