6
Getting Started!!
1. Playing The Demo Song
We have included a demo song on your HDR to help you become familiar
with the operation of the unit. We recommend you practice using the volume
and panning controls while playing back the demo song.
1
Connect the AC cord to the back of the HDR.
2
Connect the MASTER OUTS on the rear of the HDR to the inputs of your
monitor system, or use headphones.
3
Plug the AC cord into a wall outlet. Turn the HDR on. The display will show
HDRV8, the software version presently installed, and the current position
"00:00".
4
Press the PLAY button. The demo song begins to play. It can be monitored
through headphones plugged into the HEADPHONE jack on the front panel,
or through the monitor system you connected in step two
Press the Mute button. The MUTE light comes on and the track select lights
come on under the track numbers. Pressing a track select button will mute that
track. The light above the track select button blinks to indicate the track is muted.
A solid green light means the track is not muted. If any tracks are muted, the
Mute light will blink to remind you of this.
6
Now try changing the volume of the tracks. Press the LEVEL button until the
VoL LED is on. Press the DISPLAY button until the MIXER LED is on. The
bargraph displays the relative volume of each track and the display shows a
value between 0 and -63.5, or OFF Use the Jog Dial to change the volume.
After you have made some changes to the volume and mute parameters,
we will save them to a new PROGRAM number. You can save up to 128 mixer
snapshots.
1.
Press the MENU button. Turn dial until the display shows "SAV “. Press
ENTER.
2.
Use the Jog Dial to change the display to read "SAV 10".
3
Press the ENTER button. The display shows "donE".
4
Press the PLAY button. Press the MENU button until “PRO” is shown.
Use the Jog Dial to change the display to "PRO 1"
Press the ENTER button. This instantly sets the mixer controls
back to the values stored in "PRO 1 ".
