Vestax FADERBOARD, Руководство пользователя

Страница: 17 / 21

EDIT A ＜ SAMPLING FREQUENCY ＞
EDIT B ＜ NUMBER OF SAMPLING BITS ＞
Rotating the knob toward the right produces a more lo-fi sound, and rotating it
toward the left produces a more hi-fi sound.
Rotating the knob toward the right will produce a sound typical of fewer bits (lo-fi),
and rotating it toward the left will produce a sound typical of more bits (hi-fi).
This effect lowers the sampling frequency and the number of sampling bits, producing a grainy sound
characteristic of cheao samplers.
DECIMATOR
EDIT A ＜ CUTOFF FREQUENCY ＞
EDIT B ＜ RESONANCE ＞
This adjusts the cutoff frequency of the band pass filter. The cutoff frequency will
rise as you turn the knob toward the right.
This boosts the sound in the region of the cutoff frequency, adding a distinctive
character to the sound. The resonance will increase as you turn the knob toward
the right.
This adds a specific frequency region to the original waveform that has been boosted by a band pass filter
RESONATOR
EDIT A ＜ CUTOFF FREQUENCY ＞
EDIT B ＜ RESONANCE ＞
Adjusts the cutoff frequency of the low pass filter. The cutoff frequency will rise as
you turn the knob toward the right.
This emphasizes the sound in the region of the cutoff frequency, adding a distinctive
character to the sound.
This is a low pass filter with resonance. It cuts the overtones that are above the cutoff frequency, producing
a milder tone.
FILTER
EDIT A ＜ TIME ＞
EDIT B ＜ FEEDBACK / LEVEL ＞
Adjusts the delay time (11 ms ~ 2048 ms). The delay time will be long as you turn
the knob toward the right.
Adjusts the level of the delay sound and the amount of feedback (the number of
deray repeats). Rotating the knob toward the right will increase the level of delay
sound, and will also increase the amount of feedback.
This is a Delay with delay time and feedback.
DELAY
EDIT A
＜
LFO RATE
＞
EDIT B
＜
CUTOFF FREQUENCY
＞
Adjusts the LFO speed of the cutoff frequency. The LFO speed will rise as you turn
the knob toward the right.
Adjusts the cutoff frequency. The cutoff frequency will rise as you turn the knob
toward the right.
The cutoff frequency is controlled by LFO.
WAH
WARRAN TY
SPECIFICATIO N S
ERRO R
M
ESSAGE
Data is unable to be read.
There is insufficient memory on your Smart Media (SM) Card. To use the SM feature on the FADERBOARD
you must have a SM Card with more than 4 MB of storage space.
Unable to read SM content. This may because the file type is incompatible with the FADERBOARD.
The FADERBOARD is able to read both WAV and AIFF files.
Error during saving to Smart Media. Please try again.
No Files Found. Either your SM Card is empty or the SM Card is corrupt.
Can't access data. SM Card protective seal is still intact.
E r.1
E r.3
E r.4
E r.7
E r.8
E r.9
17