EFFECT
On the FADERBOARD, you can select and use one of
twelve types of effect for each pattern.
The effect can be selected by using EFFECT SELECT
SWITCH, and can be turned on/off by using EFFECT
ON/OFF SWITCH.
Use the two knobs (EDIT VOLUME A, EDIT VOLUME B)
to adjust the parameters, which will differ depanding on
the selected effect.
EFFECT
MIN
MAX
MIN
MAX
EDIT
A
B
ON
OFF
REVERB
DELAY
WAH
COMPRESSOR
PITCH SHIFTER
RING MOD.
FLANGER
PHASER
DISTORTION
DECIMATOR
FILTER
RESONATOR
Some time may be required for the effect to begin applying when you switch patterns.
WARRAN TY
SPECIFICATIO N S
EFFECT ON/OFF SWITCH
EFFECT SELECT SWITCH
EDIT VOLUME B
EDIT VOLUME A
15
・
・
Pressing MIDI SWITCH for one (1) second, MIDI mode comes to effective.
Select the note number for output format either
『
nt1
』
or
『
nt2
』
by CONTROL FADER.
2. MIDI MODE SETTINGS
In order to allow you to use the various effects and other features on the FADERBOARD for a sound source originating
from an external MIDI device, there is a Read Only Program. This program allows you to control the output source
from an external MIDI device through the FADERBOARD.
This program is found after program d.10 (Drum / Percussion Program #10) and is easily selected using the CONTROL
FADER or the EXIT / - and ENTER / + SWITCHS.
Connect your external MIDI device to the MIDI out on the rear panel of the FADERBOARD and then select the Read
Only Program to begin use.
READ ONLY PROGRAM
The note number created under the setting of OCTAVE SWITCH, KEY
ASSIGN SWITCH, SCALE SELECT SWITCH will come out from MIDI
OUTPUT. CONTROL FADER adjusts the program (TONE) of the MIDI
receiver.
The fixed note number is assigned to each KEY FADER. The range of the
note number is from 35 to 64 and OCTAVE SWITCH determines their range
as below.
『
nt1
』
『
nt2
』
The DISPLAY shows
『
-
』
after pressing SAVE SWITCH and MIDI mode is set with ENTER / + SWITCH on.
・
・
OCTAVE SWITCH
・
OCTAVE SWITCH
・
OCTAVE SWITCH
-1
0
+1
35
〜
44
45
〜
54
55
〜
64
Содержание FADERBOARD
Страница 21: ......
