Vessel GT-CD60-34, Инструкция по эксплуатации

Страница: 12 / 40

Maintenance/Repairs
11
・
We recommend periodic inspections for safe, worry-free use. If
inspections are neglected, it may affect the performance, lifespan and
safety of the product.
・
Inspection (maintenance) should be conducted only by those who
carefully read and fully understood the instruction manual for this product.
・
Contact the local distributor for repairs. Do not repair the unit by yourself.
Points of regular maintenance
When conducting maintenance, be sure to remove the hose coupling and
do not supply any air.
● Drill bit
Abrasion…Drill bit should be replaced or re-sharpen when it is worn out.
Deformation or crack…Deformation or cracked accessories might break
suddenly and. Stop using such damaged accessories
and replace them.
● Hose couplings
Loose screws
…
Tighten them since it is dangerous if the hose comes
off.
Worn out
………
Replace with new parts since the coupling may come
off if the connection is loose.
●Throttle button / ●Throttle lever
Return condition
…
Confirm whether the lever returns properly. It is very
dangerous to use the tool continuously if the lever
does not return properly because the tool will start
suddenly after connected. If the lever does not return,
please request repairs.
●Parts looseness
Parts Looseness cause air leak or failure of product so please
ask for repair when the parts loose.
● Surface damage
Cracks
………….
Stop using and request repairs.