Vessel GT-CD60-34, Инструкция по эксплуатации

Страница: 10 / 40

How to Use
9
● Air coupling
When using the air coupling included in the package, purchase a
compatible connector. When connecting a hose directly to this product,
purchase a hose connection coupling. In both cases, check the size of
the connected hoses.
● Initial start up.
Please blow of dusts in the pipe work when you start up our product first
time And please make idle running for few seconds without attaching
drill bit to blow off oil inside of the product.
● Before use.
Please confirm condition of the product and drill bit before in use.
Please do not attach drill bit when you confirm the rotation speed.
● Lubrication
Lubricate the unit regularly for smooth operation of the motor part and to
remove impurities. If you install a lubricator, it will lubricate the tool
automatically. Or, you can lubricate manually from the air supply port
before or after use. (ISO VG10 or equivalent hydraulic oil.)
●Handling of the unit
Do not drop the unit or subject it to shock as it may cause damage. Also
it must be kept away from any organic solvents as it may cause
deformation.
● In cold areas
Moisture inside the tool may freeze in winter. Be sure to lubricate the tool
to remove the moisture after use.
How to Use
●Installation of drill bit.
Please shut off air supply to the
product when you remove or attach
drill bit.
1. Fix corner head using handle.
2. Attach drill bit.
3. Fix drill bit using wrench attached.