EN
To program an MMSI with a handset
22
To confirm AIS operation
LED indicator panel
Green light indicates AIS data transmission
Handset
> Main Menu. ( ) Select the
wrench icon ( ) to open the
Configuration Menu.
> Systems
> AIS (View RX and TX data counter)
Onboard App
> Main Menu ( ) to open the Settings Menu.
> Device Settings > Systems...
> AIS... (View RX and TX data counter)
Onboard App (or handset Status Bar pictured)
Transponder receive only mode (Stealth mode)
is controlled (on/off) from within this menu.
VHF
To program an MMSI with a handset
1. Turn Cortex Cortex Hub and handset ON.
Switch the vessel’s batteries ON to power the Cortex Hub
2. Connect the handset to the Cortex Hub via WiFi
See Connecting to an Cortex Hub section
3. Select the handset Main Menu and program as follows;
> Main Menu. ( ) Select the wrench icon (
) to open the Configuration
Menu.
> Vessel
>
Vessel Identification
> MMSI (Enter MMSI number)
> Name (Enter the vessel’s name)
> Callsign (Enter the vessel’s callsign)
> Vessel Type (Select from the list)
To program your vessel dimensions with a handset
> Main Menu. ( ) Select the wrench icon (
) to open the Configuration
Menu.
> Vessel
> Dimensions
> Length (Enter length overall)
> Beam (Enter beam overall)
> GPS from stern (Enter measurement)
> GPS from starboard (Enter measurement)
Transponder Status
