vesper marine WatchMate 650 Скачать руководство пользователя | Manualshive

Страница: 66 / 67

background image

Warranty - European Union

The

AIS

WatchMate

is warranted, when properly installed and used, to be free

from defects in materials or workmanship for two years from the date the product
was purchased by the first retail customer. This warranty applies to the original
retail purchaser only and is not transferable. Within this period, Vesper Marine
will, at its discretion, repair or replace any components which fail in normal use.
Repairs or replacement will be made at no charge for parts or labour, provided that
the customer shall be responsible for any transportation costs. This warranty does
not cover failures due to abuse, misuse, accident, improper installation,
unauthorized alterations or repairs, shipping damage, wear and tear, or corrosion.

This warranty will not apply if the product's external housing has been opened, the
serial number or other labels have been removed or altered, the specified input
voltage has been exceeded, or the external alarm maximum switched current has
been exceeded.

This warranty is in addition to all other rights available to the consumer under any
applicable statute and your statutory rights are not affected by this warranty.

Vesper Marine retains the exclusive right to repair or replace the unit or offer a full
refund of the purchase price at its sole discretion. In addition, Vesper Marine
retains the exclusive right to replace the unit with a factory reconditioned unit or a
new unit at its sole discretion. Where a replacement is provided the original
product becomes the property of Vesper Marine and the warranty will remain from
the original purchase date.

This warranty applies only to products supplied new to you by a stockist or Vesper
Marine and you have not bought the product for resale.

In no event shall Vesper Marine be liable for any incidental, special, indirect, or
consequential damages, whether resulting from the use, misuse or inability to use
the product or from defects in the product.

- 66 -

«
...
64
65
66
67
»

Содержание WatchMate 650




































































Отзывы:

Нет отзывов

Похожие инструкции для WatchMate 650

Бренд: BACtrack Страницы: 16

Бренд: EAW Страницы: 2

Бренд: abc Страницы: 28

Бренд: Varytec Страницы: 5

Бренд: Saab Страницы: 98

Бренд: Kaixin Страницы: 89

Бренд: H&S Страницы: 42

Бренд: Pari Страницы: 282

Бренд: TC Electronic Страницы: 67

Бренд: Tascam Страницы: 3

Бренд: UEi Страницы: 5

Бренд: UGO BASILE Страницы: 47

Бренд: UFO Страницы: 16

Бренд: GE Страницы: 644

Бренд: Kamar Страницы: 2

Бренд: AGCO Страницы: 44

Aesculap S4 FW103R

Бренд: Braun Страницы: 39

Бренд: Heitronic Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды