vesper marine WatchMate 650, Руководство пользователя

Страница: 19 / 67

data and merge it into its NMEA output stream. Some AIS receivers
and all transponders include an integrated or internal GPS and in this
case an external GPS is not necessary. Consult the installation
manual for your AIS receiver or transponder to determine how to
wire these connections.
When using this configuration, the NMEA data stream output by the
AIS receiver or transponder (including GPS data) is wired to the
AIS
WatchMate
serial port 2. This allows serial port 1 to be used to
provide output data to an optional computer or chart plotter that
accepts 38,400 baud NMEA 0183 HS sentences.
This is the default configuration and no settings need to be changed.
Routing GPS and AIS data Direct to the
AIS
WatchMate
Use this configuration if your AIS receiver cannot merge the GPS
data into the output stream or if it is easier to install it this way. The
GPS and AIS receivers are connected directly to the
AIS
WatchMate
which merges the NMEA data into a single data stream that can be
optionally connected to a suitable computer or chart plotter.
- 19 -
38400
baud
VHF
Antenna
Optional
computer or
chart plotter
AIS
Receiver
GPS
AIS
WatchMate
38400
baud
4800 baud
P
o
rt
1
P
o
rt
2