Connections to Common Chart Plotters
The following table is intended to assist with connecting common
chart plotters to receive AIS output from the
AIS
WatchMate
.
However, since products change frequently,
carefully check these
connections with the manuals supplied with your specific chart
plotter
.
These connections assume you want to connect your AIS receiver or
transponder to port 2 and your chart plotter to port 1.
To use this table, connect the wire from the first column
(
AIS
WatchMate
) to the wire in one of the other columns that
corresponds to your GPS or chart plotter.
AIS
WatchMate
Raymarine
C or E series
Garmin
3000
Garmin 4000/5000
Input (pink) *
Yellow
Blue
Gray
Output (gray)
White
Brown
White
Signal ground (red) DC ground
Black
Orange/White
(connect this to
DC ground also)
* This connection is not necessary unless you are supplying GPS
data from the chart plotter directly to the AIS WatchMate. If GPS
data is being supplied via an AIS receiver or transponder then leave
off this connection.
- 29 -
Содержание WatchMate 650
Страница 1: ...Owner s Manual WM650 C3 11 0905 ...