1 - 3
Vertu phone keypad
>
Insert the battery (
07
) top end first. Ensure that
the contacts on the top end of the battery align
with the contact points (
08
) inside the battery
compartment.
>
Ensure that the battery and SIM card are seated
correctly before replacing the back cover.
>
Pivot and slide the back cover into position until
it clicks into place. The cover should close
tightly using only light pressure – do not force it
closed! If the cover does not close easily,
remove it and check the battery and SIM are
correctly inserted, and the retainer (
09
) is
correctly positioned and locked.
For information about removing the battery, refer to
“Removing the battery” on page 5-4.
V E R T U P H O N E K E Y P A D
Alphanumeric keys, referred to as
N U M B E R
keys in
this guide, are used to key in numbers or
characters, for example when making calls, storing
names in the directory or writing text messages.
Below the display are two
S E L E C T I O N
keys. The
function of these keys depends on the text
displayed above them.
For example, press the
S E L E C T I O N
key below
menu
to access the menu or press the
S E L E C T I O N
key below
directory
to access the directory.
When pressing keys, press them briefly and firmly,
without holding them down unless otherwise
instructed.
07
08
09
Usermanual_en.book Page 3 Wednesday, January 7, 2004 5:55 PM
