Vertiv NetSure M832DNA, Руководство пользователя

Страница: 100 / 176

Vertiv
| NetSure Monitor Unit User Manual (UM1M832DNA) | Rev. C 100
Figure 66:
Upload/Download File
ALERT! Never navigate from this Web page without first clicking on "Start Controller". If you do, you will
not have Web access. A manual system reset is required to restore Web access.
5. To download (from your computer into the monitor unit) a configuration package, application ("All")
package, language package, or a "SettingParam.tar" file; click the "Browse..." button and navigate to the
folder where the file to download is located. Select the file to be downloaded and then click the
"Download to Controller" button. Click "Start Controller" to restart the monitor unit with the downloaded
file installed.
To upload a file to your computer, select "Configuration Package" or "Language Package" from the "File
in Controller" drop-down list box, and click on the "Upload to Computer" button to save the file to your
computer. Select where you want the file to be copied to on your computer. Click "Start Controller" to
restart the monitor unit.
ALERT! A configuration package can only be downloaded to a monitor unit with the same software
version the file was created from. This file is NOT forward compatible.
NOTE!
Ensure Internet Explorer security settings are set to enable a file to be copied to your computer.
NOTE!
A Configuration Package is a package of files containing all the default parameter settings and
any User changes to alarm severity levels, relay assignments, and signal names.
NOTE!
An Application “All” package file has both the application (software) and configuration package
and is usually supplied for an application upgrade.
NOTE!
A Language Package is a package of files containing all the default names of the parameters in
two languages. Typically these would be in English and Chinese. The language package cannot be
changed by the User. Consult Vertiv if a different language package is required.
NOTE!
A file named “SettingParam.tar” is automatically created/appended by the monitor unit
whenever a User (or the factory at the time of shipment) makes changes to any parameter settings via
the local display or Web Interface.