manualshive.com logo in svg

Vertiv Liebert RX, Руководство пользователя

Поделиться
Скачать
Vertiv Liebert RX Скачать руководство пользователя страница 5

Vertiv

| Liebert

®

 RX

™

 Remote Distribution Cabinet User Manual  | 

1

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

This manual contains important instructions that should be followed during installation of the 
Liebert RX. Read this manual thoroughly, paying special attention to the sections that apply to 
your installation, before installing or operating the Liebert RX. Retain this manual for use by 
installing personnel.
Only properly trained and qualified personnel wearing appropriate safety headgear, gloves, shoes 
and glasses should be involved in installing the Liebert RX or preparing the unit for installation.
In case of fire involving electrical equipment, use only carbon dioxide fire extinguishers or those 
approved for use in fighting electrical fires.
Extreme caution is required when performing installation and maintenance.
Special safety precautions are required for procedures involving handling, installation and 
maintenance of the Liebert RX. Observe all safety precautions in this manual before handling or 
installing the unit. Observe all precautions in this manual before as well as during performance of 
all maintenance procedures.

ELECTROMAGNETIC COMPATIBILITY

—The Liebert RX complies with the limits for a Class A 

Digital Device, pursuant to Part 15 of FCC rules. Operation is subject to the following two 
conditions: 

•

This device may not cause harmful interference, and

•

This device must accept any interference received, including interference that may cause undesired 
operation.

WARNING

Risk of electric shock. May cause personal injury or death.
Verify that all incoming line voltage (power) circuits are de-energized and locked out 
before installing cables or making connections in the unit.
Equipment inspection and startup should be performed only by properly trained and 
qualified personnel wearing appropriate safety headgear, gloves and shoes. Lethal voltages 
are present during startup procedures. Electrical safety precautions must be followed 
throughout inspection and startup.
Only properly trained and qualified service personnel wearing appropriate safety headgear, 
gloves, shoes and glasses should perform maintenance on the Liebert RX. All voltage 
sources to the unit must be disconnected before inspecting or cleaning within the cabinet.

WARNING

Risk of electric shock. May cause personal injury or death.
Lethal voltages exist within the equipment during operation. Observe all warnings and 
cautions in this manual. Failure to comply may result in serious injury or death. Obtain 
qualified service for this equipment as instructed. All power wiring should be installed by 
licensed electricians and must comply with the NEC and applicable codes.

WARNING

Risk of heavy unit falling or tipping over. Improper handling can cause equipment damage, 
injury or death.
The unit should NOT be loosened from the shipping pallet until after all handling by forklift 
or pallet jack is completed. Exercise extreme care when handling Liebert RX cabinets to 
avoid equipment damage or injury to personnel.

Содержание Liebert RX



































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды