Vertiv Liebert PSI XR 1000, Руководство пользователя, Страница: 16 / 38

Figure 3.4 Orienting the UPS display
3.5 Charge Batteries and Perform Battery Startup
Before connecting input power or connecting the load, Vertiv recommends these steps:
• Charge the battery for at least 8 hours.
• Start the UPS on battery to ensure the battery is fully functional and charged.
• Turn the unit Off and proceed to Connect Input Power and Load below.
3.6 Connect Input Power and Load
The 1000VA and 1500VA models do not include an input power cable; the 2200VA and 3000VA UPSs
include an input power cable.
Connect input power to the UPS, then plug the equipment into the sockets on the rear of the UPS. These
UPS sockets provide battery backup and surge protection to the equipment when mains power fails,
spikes or sags (see Figure 3.5 on the facing page).
Vertiv | Liebert® PSI XR™ User Manual | 12