Vertiv Liebert PSI XR 1000, Руководство пользователя

Страница: 13 / 38

3 INSTALLATION
3.1 Preparation
Inspect the UPS for freight damage. Report any damage to the carrier and your local dealer or Vertiv
representative.
CAUTION: Risk of injury from heavy unit. May cause equipment damage or personal injury.
The UPS and battery cabinets are heavy (see Table 8.1 on page 27 and Table 8.2 on page 28).
Take proper precautions when lifting or moving either the UPS or battery cabinets.
The Liebert PSI XR may be installed in either a tower or rack configuration. Determine the method that
suits the application and proceed.
Decide where to install the Liebert PSI XR. The UPS must be installed indoors in a controlled environment.
Place it in an area with unrestricted airflow around the unit, away from water, flammable liquids, gases,
corrosives and conductive contaminants (see Figure 3.1 below).
Maintain a minimum clearance of 305mm (12 inches) in the front and rear of the UPS. Maintain an ambient
temperature range of 0°C to 40°C (32°F to 104°F) (see Figure 3.1 below).
Figure 3.1 Placing the Liebert PSI XR
3.2 Tower UPS Installation
See Figure 3.2 on the next page when using the Liebert PSI XR in a tower configuration.
Vertiv | Liebert® PSI XR™ User Manual | 9