Vertiv Liebert CW Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 76

Vertiv Liebert CW Скачать руководство пользователя страница 6

WARNING! Risk of electric shock. Can cause serious injury or death. Open all local and remote
electric power supply disconnect switches and verify with a voltmeter that power is off before
working within the fan-motor electric-connection enclosures. Fan-motor controls can maintain
an electric charge for 10 minutes after power is disconnected. Wait 10 minutes after power is
verified as off before working within the electric control/connection enclosures. Use only fully-
trained and qualified HVAC technicians to perform maintenance on the fans.

WARNING! Risk of improper moving. Can cause equipment damage, injury or death. Use only
lifting equipment that is rated for the unit weight by an OSHA-certified rating organization. The
center of gravity varies depending on the unit size and selected options. The slings must be
equally spaced on either side of the center of gravity indicator.
Shipping weights and unit weights are listed in the tables in

Shipping Dimensions and Unit

on page 12. Use the center of gravity indicators on the unit to determine the position of

the slings.

WARNING! Risk of improper wiring, piping, moving, lifting and handling. Can cause equipment
damage, serious injury or death. Installation and service of this equipment should be done only
by qualified personnel who have been specially-trained in the installation of air-conditioning
equipment and who are wearing appropriate, OSHA-approved PPE.

WARNING! Risk of improper piping installation, leak checking, fluid chemistry and fluid
maintenance can cause equipment damage and personal injury. Installation and service of this
equipment should be done only by qualified personnel who have been specially-trained in the
installation of air-conditioning equipment and who are wearing appropriate, OSHA-approved
PPE.

WARNING! Risk of contact with high-speed rotating fan blades. Can cause serious injury or
death. Open all local and remote electric power-supply disconnect switches, verify with a
voltmeter that power is off, and verify that all fan blades have stopped rotating before working
in the unit cabinet or on the fan assembly. If control voltage is applied, the fan motor can restart
without warning after a power failure. Do not operate the unit with any or all cabinet panels
removed.

WARNING! Risk of top-heavy unit falling over. Improper handling can cause equipment
damage, injury or death. Read all of the following instructions and verify that all lifting and
moving equipment is rated for the weight of the unit before attempting to move, lift, remove
packaging from or prepare the unit for installation.

Vertiv | Liebert® CW™ Installer/User Guide

2

«
...
4
5
6
7
8
...
»

Содержание Liebert CW













































































Отзывы:

Нет отзывов