Vertiv™ XTE 601E Series Equipment Enclosures Description and Installation Manual
Proprietary and Confidential © 2022 Vertiv Group Corp.
58
13.2
Battery Boxes
Up to two (2) battery boxes may be installed within the equipment frame. Each battery box houses one (1) -48V string of NiCd
batteries.
13.2.1
Battery Boxes Heating
The batteries may be heated through use of the optional battery heater kit (p/n 565616).
13.2.2
Cabling
One set of 4/0 AWG battery cables are provided for each of the two (2) battery boxes. Battery intercell connectors are not supplied
with the enclosure and need to be ordered with the batteries.
13.2.3
Battery Disconnect
A battery disconnect circuit breaker (250 A) is provided in each of the battery boxes.
13.2.4
Anti-Oxidant
Before making any connection, ensure that all contact surfaces have been cleaned and coated with a thin coat of NO-OX-ID-A, or
other equivalent anti-oxidant compound.
13.2.5
Physical Battery Placement
Figure 13.5 illustrate the typical placement of batteries in one of the two (2) battery boxes.
13.2.6
Physical Size of Battery Box
The free space available for batteries in each of the two (2) battery boxes is:
•
23.78" (60.40 cm) wide for all four batteries.
•
26.07" (66.21 cm) deep.
•
10.63" (27.00 cm) high.
13.3
Supported Batteries
The enclosure can be equipped with two (2) -48 VDC battery strings, providing emergency backup power in the event that AC
service is lost.
The enclosure supports the batteries listed in Table 13.1 at a minimum.
