Vertiv™ XTE 601E Series Equipment Enclosures Description and Installation Manual
Proprietary and Confidential © 2022 Vertiv Group Corp.
57
13
Batteries
13.1
Safety Precautions
DANGER!
RISK OF ELECTRICAL SHOCK, GENERAL
All ground connections must be installed and verified prior to connecting any power cables (AC or DC) and turning-up of
enclosure.
When connecting any discrete power connection, make the connection to the ground/return first.
When disconnecting any discrete power connection, remove the connection to the ground/return last.
Remove rings, metallic wrist bands, or bracelets, etc.
Do not install equipment showing any physical damage.
DANGER!
RISK OF ELECTRIC SHOCK
The DC bus may be powered by DUAL power sources – Rectifiers and DC Batteries.
To properly work on the system, de-energize by disconnecting BOTH power sources. Even with the batteries turned off by
using a local battery (circuit breaker) disconnect, batteries are still “LIVE” and hazardous, including a voltage >50 VDC, and a
source of high short circuit current.
Use extreme caution around the batteries and terminals.
Do not smoke.
Remove all jewelry, use proper Personal Protective Equipment (PPE), and use only insulated tools.
WARNING!
RISK OF CHEMICAL EXPOSURE
A battery can present harmful chemicals. Refer to the Battery Installation Manuals and MSDS supplied with the batteries.
Work in a ventilated area and follow all safety procedures.
At a minimum, wear safety glasses and gloves when working with batteries.
WARNING!
RISK OF HAZARDOUS SUBSTANCES
After handling of the enclosure or any such component; such as batteries, cables, busbars, etc., always wash hands
immediately after.
WARNING!
RISK OF EXPLOSION
For safety reasons, never restrict or block the airflow through the door or entry panel ventilation openings.
WARNING!
RISK OF INJURY, LIFTING BATTERIES
Batteries are heavy, use appropriate techniques and assistance when handling.
CAUTION!
PREVENT EQUIPMENT DAMAGE, PROPER HANDLING
Do not stack batteries or lay them on their side. Do not tip batteries -- keep in upright position at all times.
CAUTION!
PREVENT EQUIPMENT DAMAGE, MAINTAIN VENTILATION
To optimize the service life of this equipment, make sure there are no obstructions in front of the ventilation openings.
NOTE!
Follow all battery manufacturer's and locally approved safety procedures and wear appropriate safety gear when
handling the batteries and connecting them.
