Vertiv
|
eSure™ Power Extend Converter Mounting Bracket Kit Installation Manual (IM565391)
|
Rev. A
25
[ ] 3.
Connect the 4-inch long return wire extension P/N 565752 provided with the power extend
converter to the return wire faston tab P/N 565990 previously installed on the distribution panel
return bar. See
for example using kit P/N 565391 with distribution panel 582127000 List
AA.
NOTE!
The power extend converter is also furnished with an 8-inch long return wire extension P/N
566207. The 8-inch long return wire extension is not used.
[ ] 4.
Connect the return wire P/N 564330 provided with the power extend converter to the return wire
extension P/N 565752. See
for example using kit P/N 565391 with distribution panel
582127000 List AA.
[ ] 5.
If the load side cables were disconnected in an above step, reinstall and tighten those cables in the
appropriate positions.
[ ] 6.
Route the return wire (P/N 564330) down and behind the power extend converter’s front mounting
bracket, then connect it to the power extend converter. See
. Orient the white square on
the return wire faston receptacle’s locking tab as shown in
Figure 20:
Connecting Power Extend Converter Return Wire (P/N 564330) and Return Wire Extension (P/N
565752) to the Power Extend Converter Return Wire Faston Tab (P/N 565990)
Distribution Panel
Return Bar
Power Extend Converter
Return Wire (P/N 564330)
Power Extend Converter
Return Wire Faston Tab
(P/N 565990)
Power Extend Converter
Return Wire Extension
(P/N 565752)
