Vertiv™ eSure™ Power Extend Converter Mounting Bracket, Door, and Top Cover Kits Installation Manual
11
1.4.3
Installing Mounting Bracket, Door, and Top Cover Kit P/N 10010670 and 60018725
NOTE!
When installing a power extend converter mounting bracket kit covered by these instructions onto a power system or
stand-alone distribution cabinet installed in an outside plant enclosure, leave the front door off the power system or stand-
alone distribution cabinet when complete with the installation.
Procedure
[ ] 1.
Refer to the “Installing Mounting Bracket Kit P/N 565649, 565926” procedure starting on page 5 to install the mounting
bracket kit portion of the “Mounting Bracket, Door, and Top Cover Kit” P/N 10010670 or 60018725.
[ ] 2.
Continue with this procedure to install the door kit and top cover kit portion of the “Mounting Bracket, Door, and Top
Cover Kit” P/N 10010670 or 60018725.
[ ] 3.
Orient the kit supplied left door bracket as shown in Figure 8. Secure the left door bracket to the distribution cabinet
using the kit supplied hardware (see Figure 8). Torque hardware as indicated in Figure 8.
Figure 8 Installing Door Left Bracket (19-inch cabinet shown, 23-inch cabinet similar)
Install Left
Door Bracket
6-32 x 3/8” Screw,
Pan Head SEMS
lock washer
Torque to 9.6 in-lbs.
6-32 x 3/8” Screw,
Flat Head
Torque to 9.6 in-lbs.
Installed View
