Vertiv™ eSure™ Power Extend Converter Mounting Bracket, Door, and Top Cover Kits Installation Manual
4
Table 6 Mounting Bracket, Door, and Top Cover Kit P/N 60018725 Contents
P/N
Description
Qty.
565926 Mounting Bracket Kit
See Table 4 for contents.
566092 Door Kit
566043
Front Door
1
566042
Front Door Bracket
1
S-0650
Nut
(factory assembled to door)
4
564200P1
Product Label
(factory assembled to door)
1
560958P2
Brand Label
(factory assembled to door)
1
514097
Caution Label
(factory assembled to door)
1
545391
Panel Position Label, 19-Positions
(factory assembled to door)
1
233394000
6-32 x 1/4” Screw
1
233362700
6-32 x 3/8” Screw, Pan Head, SEMS Lock Washer
1
224415500
6-32 x 3/8” Screw, Flat Head
1
223772500
6-32 Nut with Washer
1
214109200
#12 Flat Washer
1
10026155 Top Cover Kit
10025296
Top Cover Bracket
1
10025332
Top Rear Cover
1
545357
Top Front Cover
1
218703200
6-32 x 3/8” Screw
6
218710500
12-24 x 1/2” Screw
2
1.4
Mounting Bracket, Door, and Top Cover Kits Installation Procedure
THESE INSTRUCTIONS SHOULD BE READ THROUGH COMPLETELY BEFORE INSTALLING THE KIT.
The following is a step-by-step procedure to install the kit. The procedure has been written for ease of use and to minimize the
possibility of contact with potentially hazardous energy. This procedure should be performed in the sequence given, and each step
should be completely read and fully understood before performing that step. Observe all “Important Safety Instructions” starting on
page v and also those presented in the following procedure. As each step of the procedure is completed, the box adjacent to the
respective step should be checked. This will minimize the possibility of inadvertently skipping any steps. If the step is not required to
be performed for your site, also check the box to indicate that it was read.
1.4.1
Important Safety Instructions
DANGER!
Adhere to the “Important Safety Instructions” starting on page v and those listed in the power system manual.
CAUTION!
When performing any step in procedures that requires removal or installation of hardware, use caution to ensure
no hardware is dropped and left inside the unit; otherwise service interruption or equipment damage may occur.
