manualshive.com logo in svg

Vertiv Avocent ACS800, Инструкция по установке и эксплуатации


Поделиться
Скачать
background image

1 INTRODUCTION

The Avocent® ACS800/8000 Advanced Console Server serves as a single point for access and administration of connected
devices, such as serial consoles, modems and power devices. The console server supports secure remote data center
management and out-of-band management of IT assets from any location worldwide.

NOTE: Unless noted, references to a console server refer to all models in the 800/8000 series.

The console server provides secure local (console port) and remote (IP and dial-up) access. The console server runs the
Linux® operating system with a persistent file system in Flash memory that can be upgraded with a local file on a computer
connected to the console server.

Multiple administrators can be logged into the console server at the same time and can use the web user interface (web UI),
the Command Line Interface (CLI utility) or DSView™ 4 management software to access and configure the console server.

NOTE: Unless otherwise noted, all references to DSView software in this document refer to version 4 or greater.

Depending on the model, the console server has either four or eight USB ports to support modems, storage devices, network
adapters, USB hubs and USB console devices. Some models have an SD card slot to support an additional storage device.

Two network ports support connections to more than one network, or can be configured for Ethernet bonding for redundancy
and greater reliability or network failover support.

For dial-in and secure dial-back with Point-to-Point Protocol (PPP), an optional internal modem can be factory installed or
you can use an external modem connected to either a serial or USB port.

1.1 Features and Benefits

1.1.1 Access options

Secure access is available through the following local (analog console port) and remote (digital IP and dial-up) options:

•

LAN/WAN IP network connection.

•

Dial-up to a factory-configured internal modem (optional) or a modem connected to one of the serial or
USB ports.

•

Target device connection. An authorized user can make a Telnet, SSH v2 or Raw connection to a target
device. For Telnet or SSH to be used for target device connections, the Telnet or SSH service must be
configured in the Security Profile that is in effect.

•

Console system console connection. An administrator can log in either from a local terminal or from a computer
with a terminal emulation program that is connected to the console port and can use the CLI utility. The CLI
utility prompt (--:- cli->) displays at login.

More than one administrator can log into the console server and have an active CLI or web UI session. All sessions receive
the following warning message when the configuration is changed by another administrator or by the system:

The appliance

configuration has been altered from outside of your session.

Upon receipt of this message, each administrator needs to verify

that changes made during the session were saved.

1.1.2 Web user interface (web UI)

Users and administrators can perform most tasks through the web user interface (web UI), which can be accessed with
HTTP or HTTPS. The web UI runs in Microsoft® Internet Explorer®, Microsoft® Edge®, Mozilla® Firefox®, Google® Chrome®
and Apple® Safari® on any supported computer that has network access to the console server. The list of supported client
browsers and their versions are available in the release notes.

1

Содержание Avocent ACS800





































































































Отзывы:

Нет отзывов

Похожие инструкции для Avocent ACS800

Billion BiPAC 4500NZ(L) User Manual preview
BiPAC 4500NZ(L)
Бренд: Billion Страницы: 146
3Com IntelliJack NJ200 Datasheet preview
IntelliJack NJ200
Бренд: 3Com Страницы: 4
Garmin GND 10 Installation Instructions preview
GND 10
Бренд: Garmin Страницы: 2
Paradyne 3172 Quick Reference preview
3172
Бренд: Paradyne Страницы: 20
Paradyne Compshere 3000 Series Notice preview
Compshere 3000 Series
Бренд: Paradyne Страницы: 2
Pantech Sprint PX-500 Quick Start Manual preview
Sprint PX-500
Бренд: Pantech Страницы: 17
SyChip WLAN6065SD User Manual preview
WLAN6065SD
Бренд: SyChip Страницы: 24
JETWAY HBJC924R3288DG2NS Series Quick Installation Manual preview
HBJC924R3288DG2NS Series
Бренд: JETWAY Страницы: 6
C-Com IPAM-1600s Series User Manual preview
IPAM-1600s Series
Бренд: C-Com Страницы: 148
SriHome NVS001B Quick Operation Manual preview
NVS001B
Бренд: SriHome Страницы: 12
Compal KALA0 Schematics Document preview
KALA0
Бренд: Compal Страницы: 47
Abocom SDW11B Specification Sheet preview
SDW11B
Бренд: Abocom Страницы: 1
Tripp Lite N201-007-YW Specification Sheet preview
N201-007-YW
Бренд: Tripp Lite Страницы: 2
Paradyne 8310 MVLt User Manual preview
8310 MVLt
Бренд: Paradyne Страницы: 108
Belkin Home Base F5L049ea User Manual preview
Home Base F5L049ea
Бренд: Belkin Страницы: 59
MicroNet SP3362F User Manual preview
SP3362F
Бренд: MicroNet Страницы: 49
Extreme Networks ExtremeCloud Appliance E1120 User Manual preview
ExtremeCloud Appliance E1120
Бренд: Extreme Networks Страницы: 219
El.Mo 090010932 User Manual preview
090010932
Бренд: El.Mo Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды