Vertiv Avocent ACS800 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 100

background image

5.

Click

Apply

. The message shows

Applying the new certificate will terminate all HTTP/HTTPS sessions. The

restart of your browser is required. Are you sure you want to continue?

6. Click

OK

to continue. The certificate will be saved and the browser will restart to use the new certificate.

NOTE: All http/https sessions will close, and the user will need to re-establish the connection.

3.3.3 System

Click

System

to display information about the console server and allow an administrator to configure the console server’s

system parameters. The following tabs are listed under System in the side navigation bar.

Security

Security Profile

A Security Profile determines which services are enabled on the console server.

During initial configuration, the console server administrator must configure security parameters to conform with the site
security policy. The following security features can be configured either in the web UI, CLI or the DSView software:

•

Configure the session idle time-out

•

Enable or disable RPC

•

Enable or disable pluggable device detection, storage devices and 1-Wire sensors

•

Ability to configure serial port access for all users, or allow the configuration of group and user-specific
authorizations to restrict access

•

Select a Security Profile, which defines:

•

Enabled services (FTP, TFTP, ICMP, IPSec, SNMP and Telnet)

•

SSH and HTTP/HTTPS access

•

Enable or disable Bootp Configuration retrieval, Bootp interface and enable or disable Live Configuration
Retrieval

The administrator can select either a preconfigured Security Profile or create a custom profile.

All the services and the SSH and HTTP/HTTPS configuration options that are enabled and disabled for each Security
Profile are shown in the Wizard - Security and the System - Security - Security Profile pages.

To configure a Security Profile:

1.

Select

System - Security - Security Profile

.

2.

In the Idle Timeout field, enter the number of seconds before the console server times out open sessions.

NOTE: This value applies to any user session to the appliance via HTTP, HTTPS, SSH, Telnet or CONSOLE port. It will
not overwrite the value configured for the user's authorization group. The new idle time-out will be applied to new
sessions only.

3.

Under the Enabled Services section, enable or disable the

RPC

checkbox.

4. Under the Pluggable Devices section, enable or disable pluggable device detection for USB and SD devices. If

enabled, the USB storage and SD card can be disabled to restrict the type of pluggable devices for security
reasons. The 1-wire sensors can also be disabled in this section.

NOTE: Disabling Pluggable Device Detection or changing the Storage Device setting will only be effective after a
reboot.

Vertiv™ | Avocent® ACS800/8000 Advanced Console Server Installer/User Guide

18

«
...
20
21
22
23
24
...
»

Содержание Avocent ACS800





































































































Отзывы:

Нет отзывов

Похожие инструкции для Avocent ACS800

Бренд: EAW Страницы: 10

Бренд: NEC Страницы: 47

Power Xpert Meter 2000

Бренд: Eaton Страницы: 16

POW-R-COMMAND 1000

Бренд: Eaton Страницы: 84

Бренд: Harman Kardon Страницы: 66

Бренд: IEI Technology Страницы: 19

Бренд: IEI Technology Страницы: 87

Бренд: IEI Technology Страницы: 3

Бренд: Idis Страницы: 86

Бренд: Paradyne Страницы: 20

Бренд: Paradyne Страницы: 2

Бренд: ebm-papst Страницы: 16

EK-FC1080 GTX Ti TF6

Бренд: ekwb Страницы: 2

Бренд: Black Box Страницы: 9

Momentum ROG Strix X570-E D-RGB

Бренд: EK-Quantum Страницы: 10

Бренд: red lion Страницы: 5

Бренд: TP-Link Страницы: 2

Бренд: Supersonic Страницы: 46

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды