VX-150 O
PERATING
M
ANUAL
11
Rotate the
DIAL
to select the desired “Sleep” duration. The selections available are
200 ms, 300 ms, 500 ms, 1 second, and 2 seconds, or OFF. The default value is 200 ms.
When you have made your selection, press the
PTT
key to save the new setting and exit
to normal operation.
When you are operating on Packet, switch the Receive Battery Saver OFF, as the sleep
cycle may “collide” with the beginning of an incoming Packet transmission, causing
your TNC not to receive the full data burst. Likewise, during voice operation, part of the
first word of an incoming transmission may be cut off during (normal) Battery Saver
operation.
TX B
ATTERY
S
AVER
The
VX-150
also includes a useful Transmit Battery Saver, which will automatically lower
the power output level when the last signal received was very strong. With the Transmit
Battery Saver, the automatic selection of Low Power operation conserves battery drain
significantly.
To activate the Transmit Battery Saver:
Press the [
F
] key, then press the [
0
(
SET
)] key to enter the Set mode.
Rotate the
DIAL
to select Menu Item #10 (“
TX SAVE
”).
Press the [
F
] key to enable adjustment of this Menu item.
Rotate the
DIAL
so as to select ON (thus activating the Transmit Battery Saver).
When you have completed your selection, press the
PTT
key to save the new setting
and exit to normal operation.
K
EYPAD
/LCD I
LLUMINATION
Your
VX-150
includes a reddish illumination lamp which aids in nighttime operation.
Three options for activating the lamp are provided:
KEY
:
Pressing any key (except
PTT
) causes the lamp to provide illumination for 5
seconds, after which the lamp will automatically shut off.
5SEC
:
Pressing the
LAMP
switch momentarily causes the lamp to provide illumina-
tion for 5 seconds, after which the lamp will automatically shut off.
TOGGLE
: Pressing the
LAMP
switch momentarily “Toggles” the lamp on and off. The
lamp will stay illuminated until you press the
LAMP
switch once more.
Here is the procedure for setting up the Lamp mode:
Press the [
F
] key, then immediately press the [
0
(
SET
)] key to enter the Set mode.
Now rotate the
DIAL
to select Menu Item #21 (“
LMP MOD
”).
Press the [
F
] key to enable modification of the current setting.
Next, rotate the
DIAL
to select one of the three modes described above.
When you have made your choice, press the
PTT
key to save the new setting for Menu
Item #21. The transceiver will now return to normal operation.
Advanced Operation
Содержание VX-150
Страница 41: ...VX 150 OPERATING MANUAL 39 Notes ...
Страница 42: ...VX 150 OPERATING MANUAL 40 Notes ...